Reply to Working on a VDJ Mapper for the midifighter

I unfortunately don't have one to test but I need to know what the led on/off note is... are they the same as the the button messages in hexidecimal?

<button name="ECHO" note="0x30" />
<button name="DELAY" note="0x31" />
<button name="FLANGER" note="0x32" />
<button name="DOPPLER" note="0x33" />
<button name="REVERB" note="0x2C" />
<button name="GATE" note="0x2D" />
<button name="FILTER" note="0x2E" />
<button name="CRUSH" note="0x2F" />
<button name="MASH 1" note="0x28" />
<button name="MASH 2" note="0x29" />
<button name="MASH 3" note="0x2A" />
<button name="BRAKE" note="0x2B" />
<button name="SHIFT 1" note="0x24" />
<button name="PARAM -" note="0x25" />
<button name="PARAM +" note="0x26" />
<button name="SHIFT 2" note="0x27" />

I also need vendor id and product id if it has one to be properly defined in VDJ.

to get that on a windows 7 pc, go into control panel --> devices --> right click the midi fighter --> properties --> hardware tab --> properties --> details tab --> in the drop down menu select "hardware id's"

some information on it can be found here
http://www.virtualdj.com/community s/1436..._question.html



Thanks for looking.

EDIT********************************************** ********

actually don't worry about the leds, they are the same as the buttons note's according to this thread. but the VID and PID would really help me out or even just the driver name if that information is not available