need help bad
need help bad Posted on: 03.05.2013 by Freddie Farringer so i have an apc 40 and i wanted to be able to cue my tracks out of it so i went ahead and bout 'komplete audio 6' i figured it out to where i can cue my tracks, but the sound only comes out of one speaker, and one of my head phones. i dont understand. please help | |
| Irmgard Sandness 03.05.2013 | Okay, so.. on the back of the KA 6, you've got one speaker plugged into output 3 and one speaker plugged into output 4, right? Those aren't stereo outputs.. Here's how I have the audio setup in Ableton: ableton1.JPGableton2.JPG |
| Freddie Farringer 03.05.2013 |
Originally Posted by makar1
|
| Freddie Farringer 03.05.2013 | so i have an apc 40 and i wanted to be able to cue my tracks out of it so i went ahead and bout 'komplete audio 6' i figured it out to where i can cue my tracks, but the sound only comes out of one speaker, and one of my head phones. i dont understand. please help |
| Freddie Farringer 03.05.2013 | mission accomplished!!! thank you so much |
| Freddie Farringer 03.05.2013 | OK on my way to store now I'll update in a lil |
| Alphonso Deitchman 03.05.2013 | Ok, for the M-Audio Studio Pro 3 you should use a couple of these cables: They're called Mono TS to RCA. Since both inputs are on the same speaker you could also use a paired cable like this: If you already have RCA to RCA cables you could just get a pair of adapters: |
| Freddie Farringer 03.05.2013 | No the have a left and a right, but it goes down into one cable, and I have an adapter for them that I'm using |
| Freddie Farringer 03.05.2013 | Man they a some lame ass m-audio studio pro3 speakers I've had them forever, need to update bad but that's not in the budget right now so I have to make due. But okay I'll try and buy some new cables. But I'm still skeptical cause when I plug the one cable I do have into the main I don't get any sound, even if I crank the huge dial in the middle of the ka6. |
| Irmgard Sandness 03.05.2013 | Okay.. if you're using computer speakers that only have one stereo cable, with probably an 1/8" plug, you'd need something like this: http://www.amazon.com/Hosa-CMP153-Ca.../dp/B000068O3C And then something like this, to join the cable from the speakers to it: http://www.amazon.com/3-5mm-Stereo-C.../dp/B001I23XR6 |
| Alphonso Deitchman 03.05.2013 | Yes, you need 1 cable per speaker. There is a large dial in the middle of the device for controlling volume through the MAIN out. What speakers are you using? |
| Freddie Farringer 03.05.2013 | Yeah but I only have one cable for both the speakers. Maybe I need to go out and buy additional cables? The other thing is when I connect it to the 'main' out let I don't get and sound out of either speaker, and I can't figure out how to configure my controlled panel to send the sound out of main. |
| Irmgard Sandness 03.05.2013 | Okay, so.. on the back of the KA 6, you've got one speaker plugged into output 3 and one speaker plugged into output 4, right? Those aren't stereo outputs.. Here's how I have the audio setup in Ableton: ableton1.JPGableton2.JPG |
| Freddie Farringer 03.05.2013 |
Originally Posted by makar1
|
| Freddie Farringer 03.05.2013 | Apc40* |
| Freddie Farringer 03.05.2013 | I'm using ableton live 9 I have the audio 6 in through USB. Apc50 in with USB 2 speakers and sennhizer headphones. The headphones are in the headphone jack in the front, the monitors are in the 3/4 out pot in the back. But only one speaker on both the headphones and the speaker produces sount |
| Alphonso Deitchman 03.05.2013 | Speakers should be connected to outputs 1 and 2 of the KA6, and Master output of your software should be routed there too. Headphones should be connected to the front Phones port (select 3/4 using the switch) and the Monitor output should be routed to outputs 3 and 4 of the KA6. |
| Jetta Drenzek 03.05.2013 | Open traktor's preferences, in Audio, make sure the Komplete 6 is chosen as your sound card, then go to routing, and put output 1 as your master and output 2 as your monitor, the L and R in each respectively. I'm not sure how everything is supposed to look because I've never set up a Komplete Audio 6, which is different than a Traktor Audio 6. |
| Alphonso Deitchman 03.05.2013 | What software are you using? And what hardware do you have, and how is it connected up? |
<< Back to General DiscussionReply