Does it matter which XLR cable I buy?

Home :: General Discussion :: Does it matter which XLR cable I buy?Reply
Does it matter which XLR cable I buy?
Posted on: 30.05.2013 by Katie Ahmady
So I'm upgrading to a mixer with XLR out instead of RCA, and I'd like to use XLR cables to hook up my PA system. My instinct with cables is to just buy the cheapest thing on Monoprice, but should I buy something a little nicer? Will I be able to hear a difference?
Katie Ahmady
01.06.2013		Thanks for the advice guys! I'm gonna go with something a little more heavy-duty than what I was first looking at then, those GLS audio cables look nice.

Originally Posted by sss18734
Hey there Tortango. I'm the guy who had the busted z2. lol.
Whoa, small world! PM me if you were ever able to figure out what was wrong with that thing, I'm not in the market for a new mixer anymore but am curious what was going on there.
Layne Koop
30.05.2013
Originally Posted by ekwipt
Personally I buy expensive cables
Careful. There is a LOT of snake oil for sale in the pro-audio department...especially near the cable display.

$2-5 per connector is reasonable.
$0.50-1.00 per foot for cable is reasonable.

Be at least slightly wary of any finished cable that is dramatically outside that general price range. Buy one, and really look it over before buying a bunch.

For someone who needs half a dozen cables, get the name brands. If you are running your own PA and need several dozen cables, make your own.
Layne Koop
30.05.2013
Originally Posted by tokenasianguy
Like everyone else, won't make a different to the sound (in fact, I and many others subscribe to the theory that the cable will NEVER influence the sound, no matter what cable), but it will make a different in the build quality.
For any cable that is carrying high power (extension cords, speaker cables), wire gauge will have an effect on the voltage drop across the cable length. As a rule of thumb, 12ga wires can be up to 50ft long, and still handle anything that a "reasonable" amp can deliver in terms of voltage. You can use smaller gauge wire, but then you need to believe about the application...and I prefer to avoid as much believeing as possible during a load in.
Romelia Stankard
30.05.2013
Originally Posted by makar1
You won't hear a difference between cheap and expensive XLRs, the only difference is how durable and easily repairable it is.
pretty much

the monoprice cables are good anyway
Katie Ahmady
30.05.2013		So I'm upgrading to a mixer with XLR out instead of RCA, and I'd like to use XLR cables to hook up my PA system. My instinct with cables is to just buy the cheapest thing on Monoprice, but should I buy something a little nicer? Will I be able to hear a difference?
Katie Ahmady
01.06.2013		Thanks for the advice guys! I'm gonna go with something a little more heavy-duty than what I was first looking at then, those GLS audio cables look nice.

Originally Posted by sss18734
Hey there Tortango. I'm the guy who had the busted z2. lol.
Whoa, small world! PM me if you were ever able to figure out what was wrong with that thing, I'm not in the market for a new mixer anymore but am curious what was going on there.
Rochel Gleese
31.05.2013		I don't go stupid expensive but Nuetrik ends and Mogami cabling are great quality for the price.

I'm happy with my purchases and like the look of snakes (no messy cabling)
Layne Koop
30.05.2013
Originally Posted by ekwipt
Personally I buy expensive cables
Careful. There is a LOT of snake oil for sale in the pro-audio department...especially near the cable display.

$2-5 per connector is reasonable.
$0.50-1.00 per foot for cable is reasonable.

Be at least slightly wary of any finished cable that is dramatically outside that general price range. Buy one, and really look it over before buying a bunch.

For someone who needs half a dozen cables, get the name brands. If you are running your own PA and need several dozen cables, make your own.
Rochel Gleese
30.05.2013		Personally I buy expensive cables, I don't get why someone would buy a DB4 or Xone 92, Traktor audio 10 and just run shitty cables.

But that's just me...
Alphonso Deitchman
30.05.2013		XLRs typically carry line or lower level signals where voltage drop isn't much of an issue, and connectors like Speakon are much safer for high power applications.
Layne Koop
30.05.2013
Originally Posted by tokenasianguy
Like everyone else, won't make a different to the sound (in fact, I and many others subscribe to the theory that the cable will NEVER influence the sound, no matter what cable), but it will make a different in the build quality.
For any cable that is carrying high power (extension cords, speaker cables), wire gauge will have an effect on the voltage drop across the cable length. As a rule of thumb, 12ga wires can be up to 50ft long, and still handle anything that a "reasonable" amp can deliver in terms of voltage. You can use smaller gauge wire, but then you need to believe about the application...and I prefer to avoid as much believeing as possible during a load in.
Erica Charvet
30.05.2013		Hey there Tortango. I'm the guy who had the busted z2. lol.

Like everyone else mentioned, it won't effect your sound. The gold plated XLR cables from monoprice are decent and I actually have quite a few of them. They are pretty fat for XLR cables, but coil very nicely which is nice.
Darlene Strohbeck
31.05.2013		Like everyone else, won't make a different to the sound (in fact, I and many others subscribe to the theory that the cable will NEVER influence the sound, no matter what cable), but it will make a different in the build quality.

I bought a cheap XLR from a discount electronics store, and after one use it doesn't work anymore.
Rena Estabrook
31.05.2013		Monoprice has been pretty good to me.
Layne Koop
30.05.2013		You probably won't hear a difference. Any reasonable cable will carry a balanced signal without audible issues.

What you will notice is that the quality of the cable jacket and connectors do matter. Better cable will lay flat and wrap easily. The cable ends are mechanical connections. You will plug & unplug the cable ends hundreds of times over the life of a cable. Neutric and Switchcraft both make very good cable ends.

In terms of "more than good enough" cables...the GLS Audio from speakerrepair.com are good value for money. I have installed hundreds of these cables in semi-permanent installations (e.g. churches, dance studios, etc). This is rubber jacketed cable with reasonable ends.

Monoprice cable has a PVC jacket. Compared to rubber jacket, PVC is less flexible and less durable (especially if walked on). I have not used Monoprice for cables, so I can not comment on the quality of the connectors.

http://www.speakerrepair.com/page/ca...ic_cables.html
Romelia Stankard
30.05.2013
Originally Posted by makar1
You won't hear a difference between cheap and expensive XLRs, the only difference is how durable and easily repairable it is.
pretty much

the monoprice cables are good anyway
Alphonso Deitchman
30.05.2013		You won't hear a difference between cheap and expensive XLRs, the only difference is how durable and easily repairable it is.

<< Back to General DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy