Recording in Traktor Scratch Pro 2 with Korg Zero 4

Home :: General Discussion :: Recording in Traktor Scratch Pro 2 with Korg Zero 4Reply
Recording in Traktor Scratch Pro 2 with Korg Zero 4
Posted on: 29.07.2013 by Christene Fixico
Hello everyone! I hope someone give me a help...how can i record the ZERO 4 master output on the Deck D of traktor in external mode without external sound card but using the internal mixer's sound card...?

http://imageshack.us/photo/my-images/21/m5j.png/
there are 10 images, click to next...
Isa Erik
11.08.2013
Originally Posted by LLIHELL
And you look this: http://imageshack.us/photo/my-images/21/m5j.png/ ....it's my first post and they aren't small...

I have trouble understanding how internal routing should be done for recording in Traktor WITH ZERO 4 Mixer and set the ZERO EDIT program...
In ZERO EDIT make sure the outputs, pre-eq read:

Ch1=1L+1R
Ch2=2L+2R
Ch3=3L+3R
Ch4=4L+4R
MASTER= 8L+8R (or any other left channel, don't know how many ch ZERO4 has? 16?)
Under recording set the ch to the value assigned for master (so 8L+8R or different)

ZERO8 printscreen is confusing me
Christene Fixico
10.08.2013
Originally Posted by SlayForMoney
your pictures are too small

please look at this thread if you have trouble understanding how internal routing should be done for recording in Traktor: http://www.denondjcommunity s.com/community s/...18557&p=141037

And you look this: http://imageshack.us/photo/my-images/21/m5j.png/ ....it's my first post and they aren't small...

I have trouble understanding how internal routing should be done for recording in Traktor WITH ZERO 4 Mixer and set the ZERO EDIT program...
Isa Erik
10.08.2013
Originally Posted by LLIHELL
HI SlayForMoney ...I have tried to do as you say...but I change set in the Zero Edit and Traktor imput but nothing ....
you see my screen?...
Sorry for my bad english....(from google translator)
your pictures are too small

please look at this thread if you have trouble understanding how internal routing should be done for recording in Traktor: http://www.denondjcommunity s.com/community s/...18557&p=141037
Christene Fixico
06.08.2013
Originally Posted by SlayForMoney
in Traktor's Input window, set your mixer's USB master out channel (on my X600 mixer it's USB 7/8) on channel D input.
in Traktor's Recording window, set recording to External and Channel D.

cheers
HI SlayForMoney ...I have tried to do as you say...but I change set in the Zero Edit and Traktor imput but nothing ....
you see my screen?...
Sorry for my bad english....(from google translator)
Christene Fixico
06.08.2013
Originally Posted by Bruiser Smith
Do you have a Mac? If so, by far the easiest way to record your mix and also control 4 channels of audio (in case you 'd like to use that deck) is to route an RCA to 3.5mm cord from your mixer output to your computer audio in, and record using Audacity.

I say this after owning a Korg Zero 4 for years and always being not thrilled about giving up 1 channel to record mixes.
HI Bruiser Smith , yes I have a IMac intelcore 2 Duo and i try the solution with Audacity and it's good...thanks

but...I also take this opportunity that you have had the mixer and I ask you: if I want to use only the Zero 4 internal sound card I have to give strength 1 mixer channel to record the master output on traktor deck D?
how can I do?...because in the Zero Edit and Traktor imput I try but nothing...you can send a screen?

Schermata 2013-07-31 a 00.05.03.jpg

Schermata 2013-08-06 a 00.32.17.jpg
Isa Erik
02.08.2013
Originally Posted by LLIHELL
Hello everyone! I hope someone give me a help...how can i record the ZERO 4 master output on the Deck D of traktor in external mode without external sound card but using the internal mixer's sound card...?

http://imageshack.us/photo/my-images/21/m5j.png/
there are 10 images, click to next...
in Traktor's Input window, set your mixer's USB master out channel (on my X600 mixer it's USB 7/8) on channel D input.
in Traktor's Recording window, set recording to External and Channel D.

cheers
Nereida Jasnoch
01.08.2013
Originally Posted by Bruiser Smith
Do you have a Mac? If so, by far the easiest way to record your mix and also control 4 channels of audio (in case you 'd like to use that deck) is to route an RCA to 3.5mm cord from your mixer output to your computer audio in, and record using Audacity.
Can confirm. Audacity. That's the way I did it.
Christene Fixico
30.07.2013
Originally Posted by MyUsername
RCA from the record out to channel D line input ?
I want to record without external sound card

Originally Posted by MyUsername
you find the channel for the master in the drop down menu for the audio in for the mix recorder ?
I all I know is that in Zero edit I tried to change all 8 channels in Bus & Master and input routing of the D-channel of traktor but nothing ...

Attachment 19170Attachment 19171Attachment 19172
Christene Fixico
29.07.2013
Hello everyone! I hope someone give me a help...how can i record the ZERO 4 master output on the Deck D of traktor in external mode without external sound card but using the internal mixer's sound card...?

http://imageshack.us/photo/my-images/21/m5j.png/
there are 10 images, click to next...
Christene Fixico
12.08.2013
ZERO8 printscreen is confusing me [/QUOTE]

...you're right, only now I understand how to have the screen of Zero4

you say that?: http://imageshack.us/a/img10/6964/7k3v.png

but does not work...

I tried to change this way: http://imageshack.us/a/img198/1664/8ykt.png

and i change all the imput in traktor: http://imageshack.us/a/img196/1064/dhmm.png

and I record with ( 9: zero4 in 8 and 10: zero4 in 9) but only if I have activated the sampler and FX on all 4 channels...

If I want to use this effect: http://imageshack.us/a/img854/311/p4o9.png only on the channel 2 (for example) the other channels that I have unchecked are not recorded
Isa Erik
11.08.2013
Originally Posted by LLIHELL
And you look this: http://imageshack.us/photo/my-images/21/m5j.png/ ....it's my first post and they aren't small...

I have trouble understanding how internal routing should be done for recording in Traktor WITH ZERO 4 Mixer and set the ZERO EDIT program...
In ZERO EDIT make sure the outputs, pre-eq read:

Ch1=1L+1R
Ch2=2L+2R
Ch3=3L+3R
Ch4=4L+4R
MASTER= 8L+8R (or any other left channel, don't know how many ch ZERO4 has? 16?)
Under recording set the ch to the value assigned for master (so 8L+8R or different)

ZERO8 printscreen is confusing me
Christene Fixico
10.08.2013
Originally Posted by SlayForMoney
your pictures are too small

please look at this thread if you have trouble understanding how internal routing should be done for recording in Traktor: http://www.denondjcommunity s.com/community s/...18557&p=141037

And you look this: http://imageshack.us/photo/my-images/21/m5j.png/ ....it's my first post and they aren't small...

I have trouble understanding how internal routing should be done for recording in Traktor WITH ZERO 4 Mixer and set the ZERO EDIT program...
Isa Erik
10.08.2013
Originally Posted by LLIHELL
HI SlayForMoney ...I have tried to do as you say...but I change set in the Zero Edit and Traktor imput but nothing ....
you see my screen?...
Sorry for my bad english....(from google translator)
your pictures are too small

please look at this thread if you have trouble understanding how internal routing should be done for recording in Traktor: http://www.denondjcommunity s.com/community s/...18557&p=141037
Christene Fixico
06.08.2013
Originally Posted by SlayForMoney
in Traktor's Input window, set your mixer's USB master out channel (on my X600 mixer it's USB 7/8) on channel D input.
in Traktor's Recording window, set recording to External and Channel D.

cheers
HI SlayForMoney ...I have tried to do as you say...but I change set in the Zero Edit and Traktor imput but nothing ....
you see my screen?...
Sorry for my bad english....(from google translator)
Christene Fixico
06.08.2013
Originally Posted by Bruiser Smith
Do you have a Mac? If so, by far the easiest way to record your mix and also control 4 channels of audio (in case you 'd like to use that deck) is to route an RCA to 3.5mm cord from your mixer output to your computer audio in, and record using Audacity.

I say this after owning a Korg Zero 4 for years and always being not thrilled about giving up 1 channel to record mixes.
HI Bruiser Smith , yes I have a IMac intelcore 2 Duo and i try the solution with Audacity and it's good...thanks

but...I also take this opportunity that you have had the mixer and I ask you: if I want to use only the Zero 4 internal sound card I have to give strength 1 mixer channel to record the master output on traktor deck D?
how can I do?...because in the Zero Edit and Traktor imput I try but nothing...you can send a screen?

Schermata 2013-07-31 a 00.05.03.jpg

Schermata 2013-08-06 a 00.32.17.jpg
Latoria Kavulich
04.08.2013
yep. any mixer with a soundcard just set channel 4 as a recording channel and you are good to go.
Isa Erik
02.08.2013
Originally Posted by LLIHELL
Hello everyone! I hope someone give me a help...how can i record the ZERO 4 master output on the Deck D of traktor in external mode without external sound card but using the internal mixer's sound card...?

http://imageshack.us/photo/my-images/21/m5j.png/
there are 10 images, click to next...
in Traktor's Input window, set your mixer's USB master out channel (on my X600 mixer it's USB 7/8) on channel D input.
in Traktor's Recording window, set recording to External and Channel D.

cheers
Nereida Jasnoch
01.08.2013
Originally Posted by Bruiser Smith
Do you have a Mac? If so, by far the easiest way to record your mix and also control 4 channels of audio (in case you 'd like to use that deck) is to route an RCA to 3.5mm cord from your mixer output to your computer audio in, and record using Audacity.
Can confirm. Audacity. That's the way I did it.
Kimberlee Giap
01.08.2013
Do you have a Mac? If so, by far the easiest way to record your mix and also control 4 channels of audio (in case you 'd like to use that deck) is to route an RCA to 3.5mm cord from your mixer output to your computer audio in, and record using Audacity.

I say this after owning a Korg Zero 4 for years and always being not thrilled about giving up 1 channel to record mixes.
Christene Fixico
30.07.2013
Originally Posted by MyUsername
RCA from the record out to channel D line input ?
I want to record without external sound card

Originally Posted by MyUsername
you find the channel for the master in the drop down menu for the audio in for the mix recorder ?
I all I know is that in Zero edit I tried to change all 8 channels in Bus & Master and input routing of the D-channel of traktor but nothing ...

Attachment 19170Attachment 19171Attachment 19172
Nereida Jasnoch
30.07.2013
RCA from the record out to channel D line input ?

Can you find the channel for the master in the drop down menu for the audio in for the mix recorder ?

I used to have this mixer but I forgot how I recorded my sets.

<< Back to General DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy