VCI-100SE DJTT Mapping Changelog
VCI-100SE DJTT Mapping Changelog Posted on: 03.12.2010 by Jodi Lacerra Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using | |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Jodi Lacerra 03.12.2010 | Thanks to the help of community
member No Left Turn, we now have a changelog of all the past versions of Dj Techtools' VCI-100SE mapping for Traktor Pro. I try to update this post once I have the chance to dig through some of my notes from the older mappings, but it is already pretty thorough. For now it should be helpful as at least a reference to older versions of the mappings (which people often ask about). However, please note that all mappings prior to 3.6 were designed for the VCI-100 FW 1.3 or below. They could be used with FW 1.4 if you edited the mappings though. If you would like to see the midi signals that changed between FW1.3 and FW1.4, please download the latest mapping and look at the last page of the Walkthrough PDF. DJTT VCI-100SE Mapping Changelog: VCI-100SE 3.6.4 http://www.djranking s.com/community /showthread.php?t=19751 Added support for the high res faders and jogs in firmware 1.4 Changed back original Play/Pause functionality. Use Shift + Play to "Re-Play". Changed back the chained FX presets in the effect section (4 knobs and buttons) to old style Shift + FX Preset 1 now turns on/off the Audio Recorder Shift + Gain knob makes Gain have soft takeover Shift + Headphone level controls Master Volume Fixed Key knob functionality (Shift + Filter) Made 2 tsi versions to fix incompatibility issues (FW 1.3 & FW 1.4). Note: FW 1.4 version will still work with older firmwares. Other minor bug fixes Updated walk through pdf to match mapping changes VCI-100SE 3.6.3 http://www.djranking s.com/community /showthread.php?t=18333 Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased VCI-100SE 3.5.2 http://www.djranking s.com/community /showthread.php?t=15916 The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down Shift+FX Preset 4 = Tree Browser Expand/Collapse VCI-100SE 3.5.1 http://www.djranking s.com/community /showthread.php?t=13563 Fixed SLICE and ECHO to set FX 3 & 4 to correct FX types and panel modes. Fixed a bug with the jog wheel scratch functionality Fixed a sampler + juggle mode bug where cues 1/5 would set FX3 to 100% wet Included GUI Layout in this tsi for new users Fixed a bug where Fader FX would get stuck Fixed a bug where Juggle would stick Fixed a bug where the pitch would drop dramatically Changed FX preset #4 to match the recent video. Fixed a bug where the LEDs would stick in the first 2 times traktor was run. VCI-100SE 3.4 http://www.djranking s.com/community /showthread.php?t=11938 Improved the Pitch bend Performance Fixed the Jog Wheel scratch bug Improved Fader FX presets 3,4 Includes a version of the TSI that fixes the FX routing Glitch VCI-100SE 3.3 http://www.djranking s.com/community /showthread.php?t=11330 Version 3.3 was updated to 3.4. VCI-100SE 3.1 http://www.djranking s.com/community /showthread.php?p=97468 Pressing Slice no longer lights up Sampler button Sampler is functional on all decks (used to work only on some and would freeze at certain times) Sampler no longer leaves headphones on after using FX3 is now un-routed from Decks using Sampler after Sampler turned off Headphones only turn on decks A/B prior to initializing sampler, not C/D (strange?) Shift + Jogwheel Stores Cue Points (with Scratch on and off) remove for Scratch on? Button B for FX Bank 2 did not work (activate/de-activate). Fixed to toggle. Snap Setting added: Shift + Juggle 1-4 button Quantize Setting added: Shift + Juggle 5-8 button When Browsing using |
| Zetta Radlinger 14.10.2011 | version 2_2 is not listed please add link |
| Zetta Radlinger 14.10.2011 | which version had the eq fx, its none of these-there must be older ones or something missed |
<< Back to DJ TechTools' VCI-100 FAQReply